/*! This file is auto-generated */ .wp-block-button__link{color:#fff;background-color:#32373c;border-radius:9999px;box-shadow:none;text-decoration:none;padding:calc(.667em + 2px) calc(1.333em + 2px);font-size:1.125em}.wp-block-file__button{background:#32373c;color:#fff;text-decoration:none} Q3OQ Hoosier Manufacturing operates a... [FREE SOLUTION] | ÷ÈÓ°Ö±²¥

÷ÈÓ°Ö±²¥

Hoosier Manufacturing operates a production shop that is designed to have the lowest unit production cost at an output rate of 100 units per hour. In the month of July, the company operated the production line for a total of 175 hours and produced 16,900 units of output. What was its capacity utilization rate for the month?

Short Answer

Expert verified

The capacity utilization rate for a month is 96.57%.

Step by step solution

01

Capacity utilization rate

The proportion of a company's total output that may be realized is termed thecapacity utilization rate.

02

Calculation of capacity utilization rate for the month

The formula is given below:

Capacity utilization = (Actual output / Efficient possible output) x 100

Where,

Set up units to produce = 100 units

Actual output = 16900 units

Ideal output or efficient possible output = 175 x 100

= 17500

The capacity to manufacture properly is not utilized.

As a result,

Capacity utilization = (16900 / 17500) x 100

Capacity utilization = 0.9657 x 100

= 96.57%.

Unlock Step-by-Step Solutions & Ace Your Exams!

  • Full Textbook Solutions

    Get detailed explanations and key concepts

  • Unlimited Al creation

    Al flashcards, explanations, exams and more...

  • Ads-free access

    To over 500 millions flashcards

  • Money-back guarantee

    We refund you if you fail your exam.

Over 30 million students worldwide already upgrade their learning with ÷ÈÓ°Ö±²¥!

One App. One Place for Learning.

All the tools & learning materials you need for study success - in one app.

Get started for free

Most popular questions from this chapter

A builder has located a piece of property that she would like to buy and eventually build on. The land is currently zoned for four homes per acre, but she is planning to request new zoning. What she builds depends on the approval of zoning requests and your analysis of this problem to advise her. With her input and your help, the decision process has been reduced to the following costs, alternatives, and probabilities:

Cost of land: \(2 million.

Probability of rezoning: 60.

If the land is rezoned, there will be additional costs for new roads, lighting, and so on, of \)1 million. If the land is rezoned, the contractor must decide whether to build a shopping center or1, 500 apartments that the tentative plan shows would be possible. If she builds a shopping center, there is a 70 percent chance that she can sell the shopping center to a large department store chain for \(4 million over her construction cost, which excludes the land; and there is a 30 percent chance that she can sell it to an insurance company for \)5 million over her construction cost (also excluding the land). If instead of the shopping center, she decides to build the 1,500 apartments, she places probabilities on the profits as follows:

There is a 60 percent chance that she can sell the apartments to a real estate investment corporation for \(3,000 each over her construction cost; there is a 40 percent chance that she can get only \)2,000 each over her construction cost. (Both exclude the land cost.)

If the land is not rezoned, she will comply with the existing zoning restrictions and simply build 600 homes, on which she expects to make $4,000 over the construction cost on each one (excluding the cost of land).

Draw a decision tree of the problem and determine the best solution and the expected net profit.

The following activities are part of a project to be scheduled using CPM:

Activity

Immediate Predecessor

Time (Weeks)

A

_

6

B

A

3

C

A

7

D

C

2

E

B,D

4

F

D

3

G

E,F

7

Question: Match the following common risks with the appropriate mitigation strategy:

Country risks A. Detailed tracking, alternate suppliers

Regulatory risk B. Careful selection and monitoring of suppliers

Logistics failure C. Contingency planning, insurance

Natural disaster D. Good legal advice, compliance

Major quality failure E. Currency hedging, local sourcing

Question: Two types of cars (Deluxe and Limited) were produced by a car manufacturer last year. Quantities sold, price per unit, and labor hours follow. What is the labor productivity for each car? Explain the problem(s) associated with the labor productivity.

Always Rain Irrigation, Inc., would like to determine capacity requirements for the next four years. Currently, two production lines are in place for making bronze and plastic sprinklers. Three types of sprinklers are available in both bronze and plastic: 90-degree nozzle sprinklers, 180-degree nozzle sprinklers, and 360-degree nozzle sprinklers. Management has forecasted demand for the next four years as follows:

Yearly Demand

1 (IN 000s)

2 (IN 000s)

3 (IN 000s)

4 (IN 000s)

Plastic 90

32

44

55

56

Plastic 180

15

16

17

18

Plastic 360

50

55

64

67

Bronze 90

7

8

9

10

Bronze 180

3

4

5

6

Bronze 360

11

12

15

18

Both production lines can produce all the different types of nozzles. The bronze machines needed for the bronze sprinklers require two operators and can produce up to 12,000 sprinklers. The plastic injection molding machine needed for the plastic sprinklers requires four operators and can produce up to 200,000 sprinklers. Three bronze machines and only one injection molding machine are available. What are the capacity requirements for the next four years? (Assume that there is no learning).

See all solutions

Recommended explanations on Business Studies Textbooks

View all explanations

What do you think about this solution?

We value your feedback to improve our textbook solutions.

Study anywhere. Anytime. Across all devices.